Pneumatic Rollers Market key Insights Based on Product Type, End-use and Regional Demand Till 2028

Hydrostatic Wheel Drive Concept Proliferating in the Pneumatic Roller Space

Hydrostatic transmission (HST) or hydrostatic wheel drive is largely preferred in compaction equipment such as pneumatic rollers over gear transmission as HST offers rapid alterations in speed ratio. There is a likelihood of efficiency being compromised with using hydrostatic wheel drive, however, it is offset with enhance maneuverability allowing the pneumatic rollers to operate over a wide range of speed/torque ratios. Various manufacturers have recently been integrating hydrostatic wheel drive in their pneumatic rollers, to name a few:

Get Report Sample Copy @ https://www.factmr.com/connectus/sample?flag=S&rep_id=1913

  • BOMAG has introduced new soil pneumatic rollers with hydrostatic four-wheel drive. This variant includes sealed frame design. The new BC462EB pneumatic roller have been introduced in the North America market
  • Volvo Construction Equipment Corporation has introduced PT220 pneumatic roller with hydrostatic drive that offer smooth operation. It includes double drum vibratory compactors that enable perfect mat with appropriate pressure. With hydrostatic drive in PT220 pneumatic rollers, efficient transition between reverse and forward direction is possible without damaging the mat
  • Case Construction has come up with SV series pneumatic rollers that use three hydrostatic drives to impart motion to the drum and rear wheels. This axle-free design has facilitated minimization of hood height enhancing visibility and efficiency

Security Marking for Pneumatic Rollers Becoming Essential – Adoption of CESAR Witnessed

Manufacturers of pneumatic rollers are intensifying their security measures on the back of increasing theft rates of pneumatic rollers. Various leaders in compaction technology have steeped-up their security markings on their range of pneumatic rollers in response to consistency in theft rates since the past couple of years. Construction Equipment Security and Registration (CESAR) has become a viable option for manufacturers of pneumatic rollers since 2008 till date. Though equipment theft has been reduced by over 60% since 2007, however, CEA predicts that theft cannot be completely eliminated. This remains a key challenge for manufacturers and CESAR can act as a theft deterrent. According to Construction Equipment Association (CEA), it is advisable for manufacturers of pneumatic rollers to implement CESAR to avoid further theft possibilities.

Road Construction of More Than 25 Million Kilometers by 2050 to Trigger Demand for Pneumatic Rollers

Transportation infrastructure plays a vital role in managing export and imports of goods across various industries, in turn contributing to the economic development of countries. In developing economies infrastructure projects are increasing at a substantial rate, particularly construction of roads, railways, and dams. Pneumatic rollers are extensively being used in road construction projects as they provide improved static penetration relocating the particles in turn enhancing the density after asphalt application. According to Global Road Map – an alliance of environmentalists, scientists, geographers and agricultural specialist – by end of 2050, new road construction of more than 25 million kilometers is anticipated. This is likely to drive the demand for pneumatic rollers in the forthcoming years.

Get Complete Research Report with TOC @ https://www.factmr.com/report/1913/pneumatic-rollers-market

Rental Business –Trend Complementing Sales of Pneumatic Rollers

Small and medium size contractors are more inclined toward using rented construction equipment such as pneumatic rollers owing to their high initial cost. Using rented pneumatic rollers on project basis can facilitate significant cost reductions of construction projects, in turn enhancing profitability. Dealers of pneumatic rollers can lease out pneumatic rollers as well as provide customization options based on project requirements along with technical assistance. Moreover, dealers in compaction equipment rental space can provide contractors with advanced pneumatic rollers at reasonable pricing. This can support contractors as they can spend extra capital on other tasks such as additional skilled labor, thus complementing business expansion. This has resulted in a significant increase in dealers of pneumatic rollers purchasing the equipment from OEMs and carrying out leasing activities.

Operator Safety Remains a Highly Emphasized Area

Safety of personnel operating pneumatic rollers has gained significant importance on the back of increasing accidents and fatalities associate with compaction equipment. According to NIOSH (National Institute for Occupational Safety and Health) it is imperative for manufacturers of pneumatic rollers to ensure operator safety by providing sufficient training, integrating pneumatic rollers with ROPS (Roll-Over Protective Structures) and seat belts in pneumatic rollers. Against this backdrop, companies are introducing pneumatic rollers with advanced safety for operators, which is likely to influence the growth of the pneumatic rollers market in the coming years. For instance, Caterpillar Inc., a new pneumatic roller with operator that seat that can rotate 360 degrees can ensure higher operator safety. This facilitates enhanced operator visibility eliminating the pneumatic rollers to reverse on field.

Energy Efficient Pneumatic Rollers – An Upcoming Trend

Construction equipment companies worldwide are largely focusing on sustainable development of projects by acquiring certifications with respect to energy efficiency. With growing concerns of environmental pollution, manufacturers of pneumatic rollers are required to develop designs that feature reduced emissions and carbon footprint during the entire project cycle. Moreover, manufacturers of pneumatic rollers are optimizing pneumatic rollers’ pump setting that can facilitate a significant reduction in fuel consumption, in turn decreasing carbon emissions.

Competitive Landscape

The report on pneumatic rollers has profiled key companies such as Volvo Construction Equipment, Caterpillar Inc., Dynapac AB, Hamm AG and Bomag GmbH. Key facets of these players including product developments and innovation along with market shares are covered in this chapter.

Manufacturers of pneumatic rollers are focusing on design developments in a bid to enhance productivity, efficiency, reducing carbon emissions and improving overall performance. For instance, Hitachi Construction Machinery Co. Ltd., has introduced ZC220P-6 pneumatic roller that meet standards of “Off-Road Act” and facilitate eco-friendly performance, ease in maintenance using DOC (Diesel Oxidation Catalyst) and safety.

Hamm AG has introduced GRW 280i pneumatic roller with easy drive that facilitates simplified operation and flexibility. This intelligent drive also enables automatic sift raps to obtain even and gentle braking in turn preventing uneven compaction.

Send an enquiry @ https://www.factmr.com/connectus/sample?flag=AE&rep_id=1913

Manufacturers of pneumatic rollers are also focusing on introducing pneumatic rollers with new combination rollers. Volvo has introduced CR30B and CR 35B combination pneumatic rollers with for small scale compaction projects that enable high quality and dense mat owing to the unique combination of two methods of compaction.

Segmentation

The market for pneumatic rollers has been segmented in detail for providing a holistic understanding to the reader. The pneumatic rollers market is segmented on the basis of engine capacity, operating capacity, drum width and region. Pneumatic rollers in the engine capacity are further classified into up to 100 HP, 100-130 HP and more than 130 HP variants. The operating capacity segment includes pneumatic rollers with up to 8000 Kg, 8,000-12,000 Kg, 12,000 to 18,000 Kg and more than 18,000 Kg. Pneumatic rollers in the drum width segment are categorized into up to 1,800 mm, 1,800-2,000 mm, 2,000-2,200 mm and more than 2,200 mm. Key regions such as North America, Latin America, Europe, CIS & Russia, Japan, Asia Pacific excluding Japan (APEJ) and Middle East and Africa (MEA) are covered in the report.

Research Methodology

Data and statistics on pneumatic rollers market provided in the report are gleaned using a unique research methodology. Primary and secondary research methods are used to garner data along with information from external sources. All data points gathered are triangulated to obtain high statistics and insights with high precision and accuracy, increasing the credibility of pneumatic rollers market report.

 About Fact.MR

Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that’s why we publish multi-industry global, regional, and country-specific research reports.

Contact Us

Fact.MR
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
Email: sales@factmr.com

Web: https://www.factmr.com/

Matched content

Editor’s pick

Express Press Release Distribution